What makes S35VN steel a good choice for daily carry?

S35VN balances edge retention, toughness, and corrosion resistance. It holds a sharp edge through repeated use without chipping easily, which matters when you're cutting cardboard, rope, or other fibrous materials daily. It also resists rust better than many carbon steels, so it tolerates sweat and moisture in a pocket.

How does the crossbar lock work?

The crossbar lock uses a spring-loaded bar that travels horizontally across the handle to engage a notch in the blade tang. When locked, the blade is held securely in place. To close the knife, you press the bar from either side to disengage the lock, making it fully ambidextrous.

Can I reposition the pocket clip?

Yes. The clip is attached with a single screw and a titanium clip plate, so you can remove and reposition it or swap it out if you prefer a different carry orientation or aftermarket clip.

Is this knife suitable for left-handed users?

Yes. The crossbar lock is accessible from both sides of the handle, and the thumbstuds work equally well from either hand. The knife does not favor one hand over the other.

How do I maintain the acid-wash titanium finish?

The acid-wash finish is durable and hides scratches better than a polished surface. Wipe the handle clean with a soft cloth to remove dirt or oils. If the finish dulls over time, a light cleaning with isopropyl alcohol will restore its look. Avoid abrasive cleaners that can alter the texture.

What is the benefit of a recessed lanyard hole?

The recessed design keeps paracord or lanyard material flush with the handle surface, so it doesn't add bulk or snag when you pull the knife from your pocket. It's a small detail that makes a noticeable difference in everyday carry.

Raccoon® TiSlim™ - Crossbar Lock (3.18" S35VN Blade & Titanium Handle) - A4510

The 3-second version

0.315-inch profile fits in your pocket like three sticks of gum
S35VN blade steel holds an edge through daily hard use
Crossbar lock with ball bearings deploys smoothly, works left or right
3.18-inch blade may feel short for large cutting tasks
Premium steel requires proper sharpening technique
Titanium handle shows scratches over time

Why it's on GiftsFeed

Pocket folder built for daily carry, refined down to a third of an inch

Most everyday folders ask you to choose: slim enough to forget in your pocket, or thick enough to feel confident in your hand. This one splits the difference by keeping the blade length and handle ergonomics of a full-size knife, then machining away every bit of excess from the frame. The result is a folder that carries like a lightweight but performs like something twice as thick, because the thinness comes from smart material removal rather than compromised geometry. It's for people who carry a knife every day and actually use it—not as a showpiece, but as a tool that needs to disappear until the moment it's needed.

Good gift when

Daily carriers who need a knife that disappears in a pocket
People who use a blade hard and often, not just occasionally
Anyone tired of choosing between slim carry and solid performance
Left- or right-handed users who want ambidextrous access

Skip it if If you rarely use a folding knife or prefer a larger blade for heavy outdoor tasks, this slim profile and moderate blade length may feel too compact for your needs.

Specs

Blade Length: 3.18 inches
Blade Steel: S35VN
Handle Material: Titanium
Lock Type: Crossbar lock with ball bearings
Overall Thickness: 0.315 inches
Blade Style: Drop point
Finish: Acid wash
Clip: 3D-milled titanium, single-screw mount
Backspacer: Aluminum
Ambidextrous: Yes

What's included

Folding knife
Titanium pocket clip (attached)

If you're giving it

No sizing to guess

Ships in manufacturer packaging. Check local laws regarding blade length and carry restrictions before gifting.

The details

This folding knife answers a specific ask: the familiar drop-point utility of a workhorse folder, slimmed to 0.315 inches so it rides unnoticed until you reach for it. The blade measures 3.18 inches, ground from S35VN steel—a choice that prioritizes edge retention and toughness over the need for frequent touch-ups. If you open boxes, strip wire, prep kindling, or handle cordage daily, this steel holds up.

The crossbar lock runs on ball bearings, so deployment is smooth and the lockup is secure. The mechanism works ambidextrously, with equal access from either side of the handle. Titanium scales keep weight in check while offering enough structural rigidity to support hard cuts without flexing.

Balance matters when a knife lives in your hand. The proportions here distribute mass evenly between blade and handle, so the tool stays stable through repetitive tasks. Chamfered edges soften contact points, dual-section spine jimping gives your thumb purchase, and a long traction strip along the handle face adds friction where fingers naturally settle during a forward grip.

The acid-wash finish on the titanium creates subtle texture and visual depth, reducing glare and adding grip without aggressive milling. CNC weight tuning removes material where it isn't needed, keeping the knife light without sacrificing strength in high-stress areas.

Details include dual-tone thumbstuds with texture, a milled titanium pocket clip mounted with a single screw for easy repositioning, and a recessed lanyard hole that sits flush when threaded. An aluminum backspacer adds a colored accent without adding bulk.

Vosteed

Raccoon® TiSlim™ - Crossbar Lock (3.18" S35VN Blade & Titanium Handle) - A4510

Titanium frame, S35VN blade, and crossbar lock in a package that disappears in your pocket

$178at vosteed.com

Quantity

Buy from Vosteed

Ships and sold by Vosteed. About this merchant

The 3-second version

0.315-inch profile fits in your pocket like three sticks of gum
S35VN blade steel holds an edge through daily hard use
Crossbar lock with ball bearings deploys smoothly, works left or right
3.18-inch blade may feel short for large cutting tasks
Premium steel requires proper sharpening technique
Titanium handle shows scratches over time

Questions

What makes S35VN steel a good choice for daily carry?: S35VN balances edge retention, toughness, and corrosion resistance. It holds a sharp edge through repeated use without chipping easily, which matters when you're cutting cardboard, rope, or other fibrous materials daily. It also resists rust better than many carbon steels, so it tolerates sweat and moisture in a pocket.
How does the crossbar lock work?: The crossbar lock uses a spring-loaded bar that travels horizontally across the handle to engage a notch in the blade tang. When locked, the blade is held securely in place. To close the knife, you press the bar from either side to disengage the lock, making it fully ambidextrous.
Can I reposition the pocket clip?: Yes. The clip is attached with a single screw and a titanium clip plate, so you can remove and reposition it or swap it out if you prefer a different carry orientation or aftermarket clip.
Is this knife suitable for left-handed users?: Yes. The crossbar lock is accessible from both sides of the handle, and the thumbstuds work equally well from either hand. The knife does not favor one hand over the other.
How do I maintain the acid-wash titanium finish?: The acid-wash finish is durable and hides scratches better than a polished surface. Wipe the handle clean with a soft cloth to remove dirt or oils. If the finish dulls over time, a light cleaning with isopropyl alcohol will restore its look. Avoid abrasive cleaners that can alter the texture.
What is the benefit of a recessed lanyard hole?: The recessed design keeps paracord or lanyard material flush with the handle surface, so it doesn't add bulk or snag when you pull the knife from your pocket. It's a small detail that makes a noticeable difference in everyday carry.