Is the S35VN steel difficult to sharpen at home?

S35VN takes and holds an edge well, but it is harder than budget steels and will dull your stones more quickly. A medium-grit diamond stone or ceramic rod works efficiently for touch-ups, and the steel responds well to stropping between sharpenings. If you already maintain your own knives, this steel will not require new equipment.

Can I move the clip to the other side or reverse the carry angle?

Yes. The clip attaches with a single screw and can be repositioned without disassembling the knife. The titanium clip plate design allows for tip-up or tip-down carry and left- or right-side mounting.

Will the thin profile make the knife feel flimsy when cutting?

No. The thinness refers to overall carry profile, not blade stock or structural integrity. The blade itself is full thickness where it meets the handle, and the titanium scales provide rigid support. The knife feels solid in hand during use; the slim design only becomes noticeable when it's clipped in your pocket.

How does the crossbar lock compare to a frame lock or liner lock?

A crossbar lock uses a horizontal bar that crosses behind the blade tang and is disengaged by pressing down on two studs. It tends to engage more positively than a liner lock and does not rely on frame tension, so it maintains consistent lockup over time. The ambidextrous design also makes it accessible regardless of hand dominance.

Does the acid-wash finish wear off with use?

The acid wash is a surface treatment that etches the titanium, not a coating that can flake or peel. It will show scratches and wear marks over time, but the texture and pattern remain permanent. Many users prefer this because the knife develops character without looking damaged.

Raccoon® TiSlim™ - Crossbar Lock (3.18" S35VN Blade & Titanium Handle) - A4509

The 3-second version

3.18-inch S35VN drop-point blade holds an edge through extended use
Overall thickness under one-third of an inch for low-profile pocket carry
Ball-bearing crossbar lock works smoothly for left- and right-handed users
Blade optimized for slicing, not prying or twisting
Titanium handle shows wear over time
Premium steel requires regular stropping to maintain edge

Why it's on GiftsFeed

A pocket folder refined to carry thinner without sacrificing strength

Most slim-profile folders sacrifice either blade length or handle comfort to hit their target thickness. This one keeps both by using titanium throughout and placing the crossbar lock mechanism where it can be fully recessed. The result is a knife that carries like a minimalist design but opens to full working dimensions—no cramped grip, no shortened blade, and no wobbly lockup. That combination matters if you actually use your folder rather than just clipping it on for show.

Good gift when

Daily carriers who want a full-size blade without the bulk
People who use their folder hard and need reliable edge retention
Left-handed users seeking ambidextrous lock and clip access
Anyone who values serviceable hardware and straightforward construction

Skip it if You need a knife for heavy prying or tasks that demand a thicker blade stock—ultra-slim geometry trades some abuse tolerance for reduced carry weight.

Specs

Blade Length: 3.18 inches
Blade Steel: S35VN
Blade Style: Drop point
Handle Material: Titanium
Lock Type: Crossbar lock with ball bearings
Overall Thickness: 0.315 inches
Finish: Acid wash black
Clip: 3D-milled titanium, single-screw attachment
Backspacer: Aluminum
Ambidextrous: Yes

What's included

Raccoon TiSlim folding knife
Titanium pocket clip (attached)
Recessed lanyard hole

If you're giving it

No sizing to guess

Check local knife laws before gifting—blade length and carry rules vary by jurisdiction.

The details

This folding knife reduces pocket bulk without thinning the parts that take stress. At just under a third of an inch thick overall, it disappears into a jeans pocket but opens to reveal a full-size 3.18-inch drop-point blade in S35VN steel—a proven alloy known for holding an edge through repeated use and resisting the kind of chipping that comes with harder tasks.

The crossbar lock rides on ball bearings for smooth one-handed deployment and closes securely when you're finished. Because the mechanism sits inside the handle rather than off to one side, both left- and right-handed users get the same clean access. Titanium scales keep weight down and wear in gracefully; the acid-wash finish adds subtle texture where your grip settles and hides the scratches that come with regular carry.

Handle ergonomics mirror the original Raccoon design, with contours that fill your palm and dual-section jimping on the spine for thumb purchase during detail work. A long traction strip runs where your index finger naturally rests. CNC machining removes material from low-stress zones to balance the knife without compromising rigidity where the blade meets the handle.

Dual-tone thumbstuds give you positive engagement when opening, and the recessed lanyard hole keeps paracord flush rather than bulging out of your pocket. The titanium clip attaches with a single screw and can be repositioned without special tools. An aluminum backspacer adds a pop of color at the tail end and closes the gap between the scales.

This is a knife built for people who carry daily and use often—tight enough tolerances to feel confident, simple enough construction to service yourself, and thin enough to forget it's there until the moment you reach for it.

Vosteed

Raccoon® TiSlim™ - Crossbar Lock (3.18" S35VN Blade & Titanium Handle) - A4509

Everyday drop-point blade in S35VN paired with titanium scales and a crossbar lock

$178at vosteed.com

Quantity

Buy from Vosteed

Ships and sold by Vosteed. About this merchant

The 3-second version

3.18-inch S35VN drop-point blade holds an edge through extended use
Overall thickness under one-third of an inch for low-profile pocket carry
Ball-bearing crossbar lock works smoothly for left- and right-handed users
Blade optimized for slicing, not prying or twisting
Titanium handle shows wear over time
Premium steel requires regular stropping to maintain edge

Questions

Is the S35VN steel difficult to sharpen at home?: S35VN takes and holds an edge well, but it is harder than budget steels and will dull your stones more quickly. A medium-grit diamond stone or ceramic rod works efficiently for touch-ups, and the steel responds well to stropping between sharpenings. If you already maintain your own knives, this steel will not require new equipment.
Can I move the clip to the other side or reverse the carry angle?: Yes. The clip attaches with a single screw and can be repositioned without disassembling the knife. The titanium clip plate design allows for tip-up or tip-down carry and left- or right-side mounting.
Will the thin profile make the knife feel flimsy when cutting?: No. The thinness refers to overall carry profile, not blade stock or structural integrity. The blade itself is full thickness where it meets the handle, and the titanium scales provide rigid support. The knife feels solid in hand during use; the slim design only becomes noticeable when it's clipped in your pocket.
How does the crossbar lock compare to a frame lock or liner lock?: A crossbar lock uses a horizontal bar that crosses behind the blade tang and is disengaged by pressing down on two studs. It tends to engage more positively than a liner lock and does not rely on frame tension, so it maintains consistent lockup over time. The ambidextrous design also makes it accessible regardless of hand dominance.
Does the acid-wash finish wear off with use?: The acid wash is a surface treatment that etches the titanium, not a coating that can flake or peel. It will show scratches and wear marks over time, but the texture and pattern remain permanent. Many users prefer this because the knife develops character without looking damaged.