What knives are compatible with this ModSwap kit?

This kit fits Porcupine folders designed for the ModSwap system. Verify your model supports interchangeable scales before ordering, as the screw pattern and crossbar dimensions are specific to that series.

Do I need special tools to install these scales?

You need Torx T6 and T8 bit drivers to remove and install the fasteners. A magnetic parts tray helps organize the small screws during disassembly.

Can I mix the black and gray hardware on the same knife?

Yes. The kit includes dual-color options for every fastener type so you can coordinate one side with the blade finish and the other with the clip, or match both sides in a single tone.

How does Micarta compare to G10 for knife handles?

Micarta absorbs less vibration than G10 and feels warmer in cold conditions because of the fabric content. It develops a polished patina with use, while G10 maintains a consistent matte texture. Both resist moisture and solvents.

Will the canvas texture wear smooth over time?

The surface burnishes slightly where your hand contacts it most, but the layered weave remains textured because the fibers are embedded throughout the material depth, not surface-printed.

Porcupine ModSwap™ Handle Scales Kits - Yellow Current Micarta - W0303

The 3-second version

Complete hardware refresh with black and gray anodized components
Canvas rag burl Micarta scales show textile grain and resist impact
Includes springs, crossbars, pivot screws, and dual clip assemblies
Requires compatible Porcupine folder
Installation needs T6 and T8 Torx drivers
Micarta color varies between batches

Why it's on GiftsFeed

ModSwap Handle Scales Kit in Yellow Current Micarta

Most aftermarket handle upgrades ship as scales alone, forcing you to reuse tired springs, scratched clips, and pivot screws with stripped heads. This kit assumes you're rebuilding the entire mechanism, not just changing color. The inclusion of both black and gray hardware in every fastener type means you can finish the knife symmetrically or mix tones per side without ordering a second kit. For anyone who's ever found themselves one crossbar short or missing a spring during a swap, the complete parts list removes the guesswork and the wait for piecemeal orders.

Good gift when

Knife owners who swap grips seasonally or by task
People who prefer texture underhand to polished finishes
Users rebuilding worn pivot assemblies and clip hardware

Skip it if You need scales for a different folder model or don't already own a Porcupine knife compatible with the ModSwap system.

Specs

Scale Material: Canvas Rag Burl - Yellow Current Micarta
Crossbars Included: 2 (1 Black, 1 Gray)
Pivot Screws: 4 T8 screws (2 Black, 2 Gray)
Pocket Clip Sets: 2 complete sets with plates (1 Black, 1 Gray)
T-Head Screws: 4 T8 screws (2 Black, 2 Gray)
Countersunk Screws: 8 T6 screws (4 Black, 4 Gray)
Springs: 1 pair
Drive Type: Torx T6 and T8

What's included

1 pair of handle scales (Canvas Rag Burl - Yellow Current Micarta)
2 crossbars (1 Black, 1 Gray)
1 pair of springs
4 pivot screws (2 Black T8, 2 Gray T8)
2 pocket clip and clip plate sets (1 Black, 1 Gray)
4 T8 T-head screws (2 Black, 2 Gray)
8 T6 countersunk screws (4 Black, 4 Gray)

If you're giving it

No sizing to guess

Best for recipients who already own a compatible Porcupine folder and enjoy modifying gear.

The details

This swap kit delivers everything required to rebuild the grip and mechanical assembly of a Porcupine folding knife from handle to clip. The canvas rag burl scales come finished in Yellow Current Micarta, a composite material layered from linen fabric and resin that shows texture variation from panel to panel. Unlike smooth synthetic grips, the woven surface gains purchase when wet or worn.

The hardware assortment includes both black and gray anodized options across every fastener and frame component. You receive a pair of crossbars, dual pivot screws in T8 drive, two full pocket clip assemblies with mounting plates, four T-head screws, and eight countersunk screws in T6. A matched pair of springs completes the action refresh.

Installation replaces the factory handle panels, internal frame pins, pivot hardware, and retention clip in one session. The dual-color hardware lets you coordinate or contrast finish between blade side and presentation side. All fasteners thread into existing holes without drilling or tapping. The scales attach with the included countersunk screws, securing over the crossbars that stabilize the liner assembly.

Canvas rag burl Micarta machines cleanly and holds detail around screw wells without chipping. The layered construction resists impact better than rigid composites, and the matte finish hides pocket wear. Color and grain pattern shift slightly between production runs as the canvas weave compresses at different angles during lamination.

Vosteed

Porcupine ModSwap™ Handle Scales Kits - Yellow Current Micarta - W0303

Complete customization kit transforms your Porcupine folder with canvas rag burl scales and matching hardware

$55at vosteed.com

Quantity

Buy from Vosteed

Ships and sold by Vosteed. About this merchant

The 3-second version

Complete hardware refresh with black and gray anodized components
Canvas rag burl Micarta scales show textile grain and resist impact
Includes springs, crossbars, pivot screws, and dual clip assemblies
Requires compatible Porcupine folder
Installation needs T6 and T8 Torx drivers
Micarta color varies between batches

Cheaper alternatives

Lookout Scales$20–$40

Questions

What knives are compatible with this ModSwap kit?: This kit fits Porcupine folders designed for the ModSwap system. Verify your model supports interchangeable scales before ordering, as the screw pattern and crossbar dimensions are specific to that series.
Do I need special tools to install these scales?: You need Torx T6 and T8 bit drivers to remove and install the fasteners. A magnetic parts tray helps organize the small screws during disassembly.
Can I mix the black and gray hardware on the same knife?: Yes. The kit includes dual-color options for every fastener type so you can coordinate one side with the blade finish and the other with the clip, or match both sides in a single tone.
How does Micarta compare to G10 for knife handles?: Micarta absorbs less vibration than G10 and feels warmer in cold conditions because of the fabric content. It develops a polished patina with use, while G10 maintains a consistent matte texture. Both resist moisture and solvents.
Will the canvas texture wear smooth over time?: The surface burnishes slightly where your hand contacts it most, but the layered weave remains textured because the fibers are embedded throughout the material depth, not surface-printed.