What knives are compatible with this scales kit?

This kit fits folding knives built on the Vosteed ModSwap platform. Confirm your specific model is ModSwap-compatible before ordering, as these components will not install on non-ModSwap folders or knives from other manufacturers.

What tools do I need to install these scales?

You will need T6 and T8 Torx drivers to remove the original hardware and install the included screws, pivot pins, and crossbars. A small parts tray or magnetic mat helps keep the various fasteners organized during disassembly.

How does Micarta compare to G10 for knife handles?

Micarta is a canvas-phenolic composite that warms slightly in hand and develops a subtle patina with use. It resists moisture absorption better than untreated wood and tends to feel less slick than G10 when wet, though it may not offer the aggressive texture of heavily milled G10 scales.

Can I mix the black and gray hardware, or do they need to match?

The kit includes matching black and gray options for crossbars, pivot screws, T-head screws, and pocket clips so you can build a monochrome assembly or mix finishes. All components are interchangeable within the ModSwap platform.

Will the blue color wear off the Micarta over time?

The blue-gray colorway runs through the layered canvas material, not as a surface coating. Minor scratches, edge wear, or surface abrasion blend into the overall finish rather than exposing a different color underneath.

Porcupine ModSwap™ Handle Scales Kits - Blue Ocean Micarta - W0306

The 3-second version

Micarta scales made from layered canvas and phenolic resin for grip and durability
Includes dual crossbars, springs, pivot screws, and two complete clip assemblies
Black and gray hardware options for monochrome or mixed-finish builds
Compatibility limited to ModSwap platform knives
Requires T6 and T8 Torx drivers for installation
Micarta texture may feel understated for some users

Why it's on GiftsFeed

Modular folding knife scales kit in Blue Ocean Micarta with full hardware

Most folding knife customization ends with a new clip or aftermarket blade coating. This kit treats the handle as a full assembly you can replace in an evening, changing grip texture, visual weight, and pocket presence all at once. Micarta holds up better than G10 when you're in and out of wet environments, and the included crossbars and springs mean you're not mixing salvaged parts with new ones. Worth it if you carry the knife daily and want a handle that improves with contact instead of showing every mark.

Good gift when

People who modify and maintain their folding knives regularly
Daily carriers who prioritize grip texture over visual flash
Anyone rebuilding a well-used folder with fresh hardware and scales

Skip it if Only compatible with specific ModSwap-platform folding knives; confirm your model accepts these components before ordering or you'll have an expensive set of parts that won't install

Specs

Handle Material: Blue Ocean Micarta (canvas-phenolic composite)
Crossbar Finishes: Black and Gray
Pivot Screws: 2 Black T8, 2 Gray T8
Pocket Clip Sets: 1 Black set, 1 Gray set (includes clip plates)
T-Head Screws: 4 total (2 Black, 2 Gray T8)
Countersunk Screws: 8 total (4 Black, 4 Gray T6)
Springs Included: 1 pair
Compatibility: ModSwap platform folding knives

What's included

1 pair Blue Ocean Micarta handle scales
2 crossbars (1 Black, 1 Gray)
1 pair of springs
4 pivot screws (2 Black T8, 2 Gray T8)
2 pocket clip and clip plate sets (1 Black, 1 Gray)
4 T8 T-head screws (2 Black, 2 Gray)
8 T6 countersunk screws (4 Black, 4 Gray)

If you're giving it

No sizing to guess

Requires compatible ModSwap knife and Torx drivers; best for recipients who already modify their gear.

The details

This kit replaces the entire exterior of a compatible folding knife with Micarta handles and matching hardware in contrasting finishes. The Blue Ocean Micarta scales deliver a grip surface built from layered canvas impregnated with phenolic resin, pressed into a dense composite that resists moisture and stands up to extended handling.

Each set includes a full complement of components: a matched pair of handle scales, dual crossbars in black and gray finishes, replacement springs, pivot screws in both colors, and two complete pocket clip assemblies with mounting plates. All fasteners are T8 or T6 Torx-head hardware, sized for tool-free field swaps when you want to change the look or replace worn parts.

The Micarta material exposes fine canvas texture at the surface, offering predictable friction without aggressive jimping or checkering. The blue-gray colorway runs through the material rather than sitting as a surface coating, so minor scratches and edge wear blend into the overall finish rather than exposing a different substrate underneath.

Crossbars, pocket clips, and screws arrive in matched black or gray sets, allowing you to build a monochrome assembly or mix finishes for contrast. The hardware is drop-in compatible with the ModSwap platform—no filing, fitting, or permanent modification required to install or remove components.

This is a cosmetic and ergonomic upgrade rather than a structural one. The scales change how the knife feels in hand and how it presents in pocket, while the included springs and pivot screws ensure smooth deployment after reassembly.

Vosteed

Porcupine ModSwap™ Handle Scales Kits - Blue Ocean Micarta - W0306

Complete swap-and-customize set with textured canvas-phenolic handles, crossbars, springs, and mounting hardware

$45at vosteed.com

Quantity

Buy from Vosteed

Ships and sold by Vosteed. About this merchant

The 3-second version

Micarta scales made from layered canvas and phenolic resin for grip and durability
Includes dual crossbars, springs, pivot screws, and two complete clip assemblies
Black and gray hardware options for monochrome or mixed-finish builds
Compatibility limited to ModSwap platform knives
Requires T6 and T8 Torx drivers for installation
Micarta texture may feel understated for some users

Cheaper alternatives

Lookout Scales$20–$40

Questions

What knives are compatible with this scales kit?: This kit fits folding knives built on the Vosteed ModSwap platform. Confirm your specific model is ModSwap-compatible before ordering, as these components will not install on non-ModSwap folders or knives from other manufacturers.
What tools do I need to install these scales?: You will need T6 and T8 Torx drivers to remove the original hardware and install the included screws, pivot pins, and crossbars. A small parts tray or magnetic mat helps keep the various fasteners organized during disassembly.
How does Micarta compare to G10 for knife handles?: Micarta is a canvas-phenolic composite that warms slightly in hand and develops a subtle patina with use. It resists moisture absorption better than untreated wood and tends to feel less slick than G10 when wet, though it may not offer the aggressive texture of heavily milled G10 scales.
Can I mix the black and gray hardware, or do they need to match?: The kit includes matching black and gray options for crossbars, pivot screws, T-head screws, and pocket clips so you can build a monochrome assembly or mix finishes. All components are interchangeable within the ModSwap platform.
Will the blue color wear off the Micarta over time?: The blue-gray colorway runs through the layered canvas material, not as a surface coating. Minor scratches, edge wear, or surface abrasion blend into the overall finish rather than exposing a different color underneath.