Can I charge devices while using the light at the same time?

Yes. Both the USB-C and USB-A ports supply power to external devices while the LEDs are running, so you can keep a monitor, recorder, or phone charged without switching off the light.

How long does it take to recharge the battery?

Recharge time depends on the power supply. Using a QC3.0 charger via the USB-C port delivers the fastest results. Standard USB charging takes longer. The OLED display shows battery status during charging.

Is the color temperature adjustable on the fly during a shoot?

Yes. You can adjust color temperature continuously from 2500K to 6300K using the onboard controls, with real-time feedback on the OLED display, so you can match ambient light or create contrast without changing gels or filters.

Will this mount on a standard camera hot shoe?

Yes. The included rail mount adapter slides onto a camera hot shoe. You can also use the quarter-inch threaded socket to attach the light to any standard tripod mount or articulating arm.

What does the 70-hour runtime apply to?

Seventy hours is the maximum runtime at the lowest brightness setting. Higher output levels and additional power draw from charging devices will reduce total runtime. The OLED display shows remaining battery capacity and current power consumption.

Nitecore SCL10 2-in-1 Smart Camera Light and Power Bank

The 3-second version

96 high-CRI LEDs with color temp adjustable from 2500K to 6300K
10,000mAh battery runs up to 70 hours and charges devices via USB
800-lumen output delivers over 2000 lux for fill or key light
Compact size suits accent light more than broad soft fill
70-hour runtime applies to lowest brightness setting
Recharge time varies with QC3.0 vs standard USB power

Why it's on GiftsFeed

A camera light with built-in power bank that runs for hours between charges

Most camera lights do one job. Power banks do another. The SCL10 collapses both into a device you're already mounting to your rig, so you're not hunting for outlets or swapping batteries mid-shoot when your recorder dies. The dual-output design means you can keep a monitor fed and a microphone charged without unplugging the light, which matters when you're alone on a job and can't afford downtime. It's the difference between carrying three devices—a panel, a brick, and a tangle of cables—and carrying one unit that mounts where you'd put a light anyway.

Good gift when

Videographers who need consistent lighting and device charging on location
Photographers working in spaces without reliable power access
Content creators who shoot across multiple setups in a single day
Anyone who wants one fewer battery brick in their camera bag

Skip it if You need a larger panel for soft, even coverage over a three-foot subject—this is a compact on-camera solution that excels at accent work, not broad fill for bigger scenes.

Specs

LED Count: 96 high-CRI LEDs
Color Temperature Range: 2500K to 6300K
Max Output: 800 lumens, over 2000 lux
Battery Capacity: 10,000mAh lithium-polymer
Max Runtime: Up to 70 hours
Ports: USB-C (QC3.0 input/output), USB-A output
Mounting: ¼-inch threaded socket, hot shoe rail adapter included
Display: OLED showing brightness, color temp, and power

What's included

Nitecore SCL10 camera light and power bank
Hot shoe rail mount adapter
USB charging cable

If you're giving it

No sizing to guess

Ships in retail packaging with rail mount and cable; no assembly required.

The details

The SCL10 packs a camera light and a 10,000mAh power bank into a single unit you can mount directly to your rig. Ninety-six high-CRI LEDs let you dial color temperature from warm 2500K to cool 6300K, while an OLED screen shows brightness, power draw, and battery status in real time. Output reaches 800 lumens and exceeds 2000 lux, enough to fill shadows or serve as key light in tight spaces.

The internal lithium-polymer battery delivers up to seventy hours of runtime at lower settings. Both USB-C and standard USB-A ports let you charge phones, recorders, or monitors while the light stays on, so you're not choosing between illumination and power. The USB-C port supports QC3.0 fast charging for quick turnarounds between shoots.

Mount it using the quarter-inch threaded socket or attach the included rail adapter to slide onto a standard camera hot shoe. The display stays readable in bright conditions, and controls respond without menus or long-press sequences. Whether you're shooting product video at a desk, conducting interviews in unfamiliar rooms, or capturing B-roll where outlets are scarce, the SCL10 handles lighting and backup power without adding a separate brick to your bag.

Nitecore

Nitecore SCL10 2-in-1 Smart Camera Light and Power Bank

Ten-thousand mAh battery powers 96 high-CRI LEDs and charges your gear simultaneously

$89.95at nitecorestore.com

Quantity

Ships and sold by Nitecore. About this merchant

The 3-second version

96 high-CRI LEDs with color temp adjustable from 2500K to 6300K
10,000mAh battery runs up to 70 hours and charges devices via USB
800-lumen output delivers over 2000 lux for fill or key light
Compact size suits accent light more than broad soft fill
70-hour runtime applies to lowest brightness setting
Recharge time varies with QC3.0 vs standard USB power

Cheaper alternatives

Questions

Can I charge devices while using the light at the same time?: Yes. Both the USB-C and USB-A ports supply power to external devices while the LEDs are running, so you can keep a monitor, recorder, or phone charged without switching off the light.
How long does it take to recharge the battery?: Recharge time depends on the power supply. Using a QC3.0 charger via the USB-C port delivers the fastest results. Standard USB charging takes longer. The OLED display shows battery status during charging.
Is the color temperature adjustable on the fly during a shoot?: Yes. You can adjust color temperature continuously from 2500K to 6300K using the onboard controls, with real-time feedback on the OLED display, so you can match ambient light or create contrast without changing gels or filters.
Will this mount on a standard camera hot shoe?: Yes. The included rail mount adapter slides onto a camera hot shoe. You can also use the quarter-inch threaded socket to attach the light to any standard tripod mount or articulating arm.
What does the 70-hour runtime apply to?: Seventy hours is the maximum runtime at the lowest brightness setting. Higher output levels and additional power draw from charging devices will reduce total runtime. The OLED display shows remaining battery capacity and current power consumption.