Will this holster fit my flashlight if it's not a Nitecore model?

It may fit if your flashlight has a head diameter between 1.25 and 1.34 inches and a body diameter between 1.00 and 1.02 inches, but Nitecore only guarantees compatibility with the P27iX, P20iX, P23i, and P20i UV. Measure your torch carefully before ordering, as lights outside those dimensions will not lock securely or seat properly.

Can I rotate the flashlight to any angle, or are the positions fixed?

The mount rotates through a full 360 degrees but locks into twelve fixed positions rather than swiveling freely. You can adjust the angle to point the beam where needed, but it will snap into one of the preset positions rather than holding at an arbitrary angle.

How do I release the flashlight from the holster?

The one-handed locking mechanism disengages as you draw the flashlight, allowing you to pull it free with a single motion. You do not need to press a separate release button or use your other hand to unlock it.

Does the holster work with belts narrower than 1.5 inches?

No, the adjustable clip is designed for belts between 1.5 and 1.97 inches wide. Narrower belts may not provide a secure fit, and the clip may shift or come loose during movement.

Is the holster rigid enough to hold up under hard use?

Yes, the glass fiber-reinforced PA66 nylon construction is designed to withstand impacts and demanding working environments. The material remains rigid enough to maintain its shape while absorbing drops without cracking.

Nitecore NTH29 Tactical Flashlight Holster for P27iX, P20iX, P23i, and P20i UV

The 3-second version

One-handed locking mechanism for quick deployment and secure retention
360° rotating mount with twelve locking positions for hands-free lighting
Dual guide rollers for smooth draws and easy reholstering
Fits only specific Nitecore models with exact dimensions
Requires belt or MOLLE system for attachment
Twelve fixed positions—mount does not swivel freely

Why it's on GiftsFeed

Tactical Flashlight Holster with One-Handed Lock and Rotating Mount

Most flashlight holsters either grip too loosely and risk losing the light during movement, or grip so firmly that retrieval becomes a two-handed ordeal. This holster solves that tension with a spring-loaded lock you can disengage with your thumb as you draw, then trust to hold during running, climbing, or crouching. The rotating mount sets it apart from fixed carriers by letting you pivot the torch into an overhead or angled work position without removing it from the holster, so you gain a hands-free task light without needing a separate headlamp or clip. That combination of quick access and stationary lighting makes it worth carrying for anyone who uses a torch repeatedly throughout the day.

Good gift when

Anyone who carries a tactical flashlight daily for work or outdoor activity
People who need hands-free lighting while keeping a torch accessible
Users frustrated by pocket carry or loose belt loops
Those who value fast access without sacrificing secure retention

Skip it if Only fits Nitecore flashlights with 1.25–1.34 inch head diameters and 1.00–1.02 inch body diameters; other torches will not lock securely or may not fit at all.

Specs

Compatible Flashlight Head Diameter: 1.25–1.34 inches
Compatible Flashlight Body Diameter: 1.00–1.02 inches
Compatible Models: Nitecore P27iX, P20iX, P23i, P20i UV
Material: Glass fiber-reinforced PA66 nylon
Rotating Mount Positions: 12 positions, 360° rotation
Belt Compatibility: 1.5–1.97 inches wide
Mounting Systems: Belt clip, MOLLE

What's included

NTH29 holster with rotating mount
Adjustable belt clip

If you're giving it

No sizing to guess

Confirm the recipient's flashlight model and dimensions before ordering, as compatibility is specific.

The details

This holster turns a tactical flashlight into a ready-access tool you can deploy with one hand, reposition as a hands-free work light, and carry without worry that it will slip free during movement. Built for Nitecore torches with specific head and body dimensions, it addresses the everyday frustrations of pocket carry—forgotten lights, slow retrieval, and no place to set the torch when both hands are occupied.

The one-handed locking mechanism secures the flashlight in place yet releases without fumbling when you need it. Twin guide rollers along each side smooth the draw and prevent binding during reholstering, so you can return the light without looking down or wrestling it back into position. When you need a stationary beam, the 360° rotating mount locks into twelve distinct positions, letting you aim the light at the work surface while keeping your hands free.

Glass fiber-reinforced PA66 nylon construction resists impacts and holds up under sustained outdoor or job-site use. The material remains rigid enough to maintain shape under load yet absorbs drops without cracking. An adjustable belt clip fits belts from 1.5 to 1.97 inches wide and attaches to MOLLE webbing, giving you options for carry whether you're wearing a work belt, duty belt, or tactical pack.

Compatibility is specific: the holster fits flashlights with head diameters between 1.25 and 1.34 inches and body diameters between 1.00 and 1.02 inches. Nitecore lists the P27iX, P20iX, P23i, and P20i UV as compatible models. Lights outside those dimensional ranges will either rattle loose or refuse to seat properly, so confirm your torch measurements before ordering.

Nitecore

Nitecore NTH29 Tactical Flashlight Holster for P27iX, P20iX, P23i, and P20i UV

Quick-draw carrier with 360° swivel work light positioning for compatible Nitecore torches

$19.95at nitecorestore.com

Quantity

Buy from Nitecore

Ships and sold by Nitecore. About this merchant

The 3-second version

One-handed locking mechanism for quick deployment and secure retention
360° rotating mount with twelve locking positions for hands-free lighting
Dual guide rollers for smooth draws and easy reholstering
Fits only specific Nitecore models with exact dimensions
Requires belt or MOLLE system for attachment
Twelve fixed positions—mount does not swivel freely

Cheaper alternatives

Questions

Will this holster fit my flashlight if it's not a Nitecore model?: It may fit if your flashlight has a head diameter between 1.25 and 1.34 inches and a body diameter between 1.00 and 1.02 inches, but Nitecore only guarantees compatibility with the P27iX, P20iX, P23i, and P20i UV. Measure your torch carefully before ordering, as lights outside those dimensions will not lock securely or seat properly.
Can I rotate the flashlight to any angle, or are the positions fixed?: The mount rotates through a full 360 degrees but locks into twelve fixed positions rather than swiveling freely. You can adjust the angle to point the beam where needed, but it will snap into one of the preset positions rather than holding at an arbitrary angle.
How do I release the flashlight from the holster?: The one-handed locking mechanism disengages as you draw the flashlight, allowing you to pull it free with a single motion. You do not need to press a separate release button or use your other hand to unlock it.
Does the holster work with belts narrower than 1.5 inches?: No, the adjustable clip is designed for belts between 1.5 and 1.97 inches wide. Narrower belts may not provide a secure fit, and the clip may shift or come loose during movement.
Is the holster rigid enough to hold up under hard use?: Yes, the glass fiber-reinforced PA66 nylon construction is designed to withstand impacts and demanding working environments. The material remains rigid enough to maintain its shape while absorbing drops without cracking.