Does this chair fit under a standard dining table?

Seat height is 18.5 inches, which works with most tables. The arms reach approximately 19 inches from the floor, so they will fit under tables with aprons 25 inches or higher. Measure your table's underside clearance before ordering if you plan to push the chairs all the way in.

How does the performance velvet hold up to spills?

The polyester velvet is treated to resist moisture and stains, so most spills wipe away with a damp cloth before they soak in. It handles everyday dining wear better than untreated cotton velvet, though it still shows directional shading typical of pile fabrics.

What kind of assembly is required?

You attach the four brushed brass legs to the upholstered seat frame. The seat, back, and arms arrive fully assembled and upholstered.

Can this chair be used outdoors?

No, it is rated for indoor use only. The velvet upholstery and metal legs are not designed to withstand weather exposure.

How much weight can the chair support?

The merchant does not specify a weight limit. The frame uses kiln-dried larch, engineered hardwood, and steel hardware, which are typical for standard adult seating.

Marit Dining Chair | Serene Brown

stainless steel

The 3-second version

Performance velvet resists stains and wipes clean after spills
Padded seat and curved backrest with integrated arms for longer meals
Brushed brass legs add visual contrast and support the upholstered frame
Arms may not slide under low table aprons
Velvet shows directional shading
Indoor use only

Why it's on GiftsFeed

Padded dining chair with arms and stain-resistant velvet upholstery

Most dining chairs are built for clearing the table, not for sitting through a meal that turns into three hours of conversation. Armless seats leave you slumping forward or perching on the edge, and fabric that looks luxurious usually means you eat carefully or accept the stains.

This chair solves both. The arms give you somewhere to settle, and the performance velvet means you can actually use it without coasters and place mats turning dinner into a production. It is worth the space it takes if you sit down more than you stack up.

Good gift when

People who sit through long dinners and want actual support
Households with kids or frequent spills that need cleanable upholstery
Anyone replacing armless chairs that leave you shifting for comfort
Rooms where brass accents tie the furniture together

Skip it if Arms may not fit under tables with aprons lower than 25 inches, and the velvet texture shows directional shading in certain light.

Specs

Overall Dimensions: 21.25"W × 24"D × 33.5"H
Seat Dimensions: 16.5"W × 17"D × 18.5"H
Backrest Height: 15"H
Armrest Height: Approximately 19"
Clearance: 12.5"
Frame Materials: Kiln-dried solid larch, engineered hardwood, steel hardware
Padding: High-resilience foam, poly-fiber
Leg Material: Brushed brass stainless steel
Fabric: 100% polyester performance velvet
Weight: 18.7 lb
Use: Indoor only
Assembly: Legs only

What's included

Marit Dining Chair (upholstered seat, back, and arms)
Four brushed brass legs
Steel hardware for assembly

If you're giving it

No sizing to guess

Large parcel delivery; recipient will need to attach legs before use.

The details

This dining chair brings the support of an armchair to the table. Padded seat and backrest sit inside a curved frame that wraps around to form arms, so you have somewhere to rest while the meal stretches into a second hour. The profile hugs without pinching, and the foam holds its shape through years of nightly use.

Brushed brass legs lift the upholstered shell off the floor and provide a visual break from the velvet. The metal is slender enough to keep the chair from looking heavy, and the finish adds warmth without demanding attention.

Performance velvet covers the seat, back, and arms. It has the hand of cotton velvet but resists moisture and stains, so a knocked-over glass or a sauce smear wipes clean instead of soaking in. The fabric is polyester, designed to handle the wear of daily dining without special treatment.

The frame uses kiln-dried larch and engineered hardwood, reinforced with steel hardware. High-resilience foam padding compresses under weight and returns to form when you stand up. Assembly means attaching the four legs; the upholstered body arrives intact.

Seat height is standard at 18.5 inches, with 12.5 inches of clearance underneath. Arms reach about 19 inches from the floor, so check that they slide under your table if you push chairs in all the way. The chair weighs just under 19 pounds and is rated for indoor use only.

Poly & Bark

Marit Dining Chair | Serene Brown

Curved profile and brushed brass legs balance comfort with a refined look

$312at polyandbark.com

Quantity

Buy from Poly & Bark

Ships and sold by Poly & Bark. About this merchant

The 3-second version

Performance velvet resists stains and wipes clean after spills
Padded seat and curved backrest with integrated arms for longer meals
Brushed brass legs add visual contrast and support the upholstered frame
Arms may not slide under low table aprons
Velvet shows directional shading
Indoor use only

Cheaper alternatives

Side Chair$149–$199

Questions

Does this chair fit under a standard dining table?: Seat height is 18.5 inches, which works with most tables. The arms reach approximately 19 inches from the floor, so they will fit under tables with aprons 25 inches or higher. Measure your table's underside clearance before ordering if you plan to push the chairs all the way in.
How does the performance velvet hold up to spills?: The polyester velvet is treated to resist moisture and stains, so most spills wipe away with a damp cloth before they soak in. It handles everyday dining wear better than untreated cotton velvet, though it still shows directional shading typical of pile fabrics.
What kind of assembly is required?: You attach the four brushed brass legs to the upholstered seat frame. The seat, back, and arms arrive fully assembled and upholstered.
Can this chair be used outdoors?: No, it is rated for indoor use only. The velvet upholstery and metal legs are not designed to withstand weather exposure.
How much weight can the chair support?: The merchant does not specify a weight limit. The frame uses kiln-dried larch, engineered hardwood, and steel hardware, which are typical for standard adult seating.