Can I switch the orientation after assembly?

No. You must choose left or right orientation at the time of purchase, and the frame is designed to be assembled in that configuration only. The main surface and return are not interchangeable once the desk is built.

Does the app work on Android?

No. The Bluetooth pairing and tracking features require the Branch Ergonomics app for iOS. You can still use the desk and access the two programmable presets via the OLED keypad without the app.

How loud is the motor when adjusting height?

Motorized standing desks typically produce a hum during movement, audible in a quiet room but not disruptive during conversation or video calls. The three-column system on this desk moves the full L-shape simultaneously, so the sound lasts for the duration of the adjustment.

Can I add a cable tray or power module later?

Yes. The desk includes integrated cable channels along the underside and legs, and you can purchase an optional cable tray or in-desk power module separately to retrofit the setup as your needs change.

How much floor space does the larger size require?

The 71-inch-by-30-inch configuration occupies a corner footprint of approximately 71 inches along one wall and 30 inches along the perpendicular wall, plus clearance behind and to the side for the return surface. Measure your room to confirm fit before ordering.

L-Standing Desk

The 3-second version

Dual surfaces rise and fall together through 23 inches of height adjustment
Three motorized columns support up to 275 pounds across the full L-shape
Bluetooth connects to iOS app for scheduled stand reminders and position tracking
Requires dedicated corner space and specific left/right orientation
Assembly required with frame and motor calibration
iOS app only for Bluetooth features

Why it's on GiftsFeed

Corner-configured motorized workstation for home offices that need room to spread

Most motorized desks make you choose between a straight run that saves space and an L-shape that anchors you in one spot forever. This one gives you the wraparound work area without locking you into a seated posture, because all three legs adjust in sync. The Bluetooth pairing matters if you tend to forget to stand—scheduled nudges and automatic tracking mean the desk holds you accountable without relying on willpower. It's worth the footprint if you actually use both surfaces and change position multiple times a day; skip it if you're looking for flexibility to rearrange or if you work mostly from a laptop at one small zone.

Good gift when

People who need multiple work zones within arm's reach at a home office
Anyone who wants posture prompts built into the workday routine
Those committed to a dedicated corner setup with room for a large footprint
Users who regularly switch between seated and standing positions

Skip it if Left- or right-hand configuration means you must commit to a specific corner or wall layout, and the footprint demands a dedicated room rather than a shared or flexible space.

Specs

Height adjustment range: 23 inches
Lift capacity: 275 lbs
Lifting columns: Three-stage motorized
Sizes: 58 in × 27 in or 71 in × 30 in
Orientation: Left or right configuration
Programmable presets: Two via OLED keypad
Connectivity: Bluetooth, pairs with iOS app
Built-in charging: USB-C port on keypad
Testing standard: BIFMA commercial-grade
Warranty: 10 years

What's included

L-Standing Desk frame with three lifting columns
Two work surfaces (main and return)
OLED keypad with USB-C charging port
Integrated cable management channels
Hardware and assembly instructions

If you're giving it

No sizing to guess

Large item requiring assembly; coordinate delivery and ensure recipient has dedicated corner space.

The details

Most standing desks give you one rectangular surface. This one wraps around a corner with two independent work zones—one main span and one perpendicular return—both driven by synchronized motors so the entire L-shape rises and falls as a unit. You get 23 inches of vertical travel, from seated to standing and back, controlled by a programmable keypad mounted where the two surfaces meet.

Three lifting columns handle the combined load, rated to 275 pounds across the full footprint. The frame is steel, the surfaces are engineered wood with a laminate finish, and the mechanism meets commercial testing standards for daily cycle endurance. You'll need a dedicated corner or wall because the configuration is either left- or right-handed; choose during ordering based on which side you want the larger surface to occupy when you face the desk.

The control pad stores two height presets with one-touch recall, and it includes a USB-C port for charging devices without hunting for an outlet. Bluetooth pairing connects the desk to a companion app for iOS, which tracks how often you change position, schedules reminders to stand, and stores additional virtual presets beyond the two on the keypad.

Cable channels run along the underside of both surfaces and down each leg, keeping power and data lines bundled and out of sight. An optional cable tray clips underneath for heavier cord loads, and an in-desk power module can be retrofitted if you need outlets and USB charging embedded in the surface itself.

Two size options are available: a 58-inch-by-27-inch configuration for tighter spaces, and a 71-inch-by-30-inch setup for rooms that can accommodate the larger footprint. Surface finishes include Woodgrain, Walnut, and White laminate, paired with leg frames in White, Charcoal, or Black powder coat.

Assembly is required. The frame ships flat-packed, and you'll bolt the legs to the underside of each surface, route cables through the provided channels, and calibrate the motors before first use. The warranty covers the frame, motors, and electronics for ten years from purchase.

Branch

L-Standing Desk

Dual surfaces, synchronized height adjustment, and app connectivity for scheduled posture reminders

$1,399at branchfurniture.com

Choose an option

Quantity

Buy from Branch

Ships and sold by Branch. About this merchant

The 3-second version

Dual surfaces rise and fall together through 23 inches of height adjustment
Three motorized columns support up to 275 pounds across the full L-shape
Bluetooth connects to iOS app for scheduled stand reminders and position tracking
Requires dedicated corner space and specific left/right orientation
Assembly required with frame and motor calibration
iOS app only for Bluetooth features

Appears in 2 guides

Cheaper alternatives

Questions

Can I switch the orientation after assembly?: No. You must choose left or right orientation at the time of purchase, and the frame is designed to be assembled in that configuration only. The main surface and return are not interchangeable once the desk is built.
Does the app work on Android?: No. The Bluetooth pairing and tracking features require the Branch Ergonomics app for iOS. You can still use the desk and access the two programmable presets via the OLED keypad without the app.
How loud is the motor when adjusting height?: Motorized standing desks typically produce a hum during movement, audible in a quiet room but not disruptive during conversation or video calls. The three-column system on this desk moves the full L-shape simultaneously, so the sound lasts for the duration of the adjustment.
Can I add a cable tray or power module later?: Yes. The desk includes integrated cable channels along the underside and legs, and you can purchase an optional cable tray or in-desk power module separately to retrofit the setup as your needs change.
How much floor space does the larger size require?: The 71-inch-by-30-inch configuration occupies a corner footprint of approximately 71 inches along one wall and 30 inches along the perpendicular wall, plus clearance behind and to the side for the return surface. Measure your room to confirm fit before ordering.