Hopsulator Slim | Plum | 12oz Slim Cans
The 3-second version
- Push-lock mechanism secures cans without unscrewing a gasket
- Double-wall vacuum insulation prevents condensation and heat transfer
- Updated gasket threads make cleaning and reassembly straightforward
- Fits only 12oz slim cans, not standard or bottle formats
- Adds bulk—not meant for pockets or tight bag pockets
- Gasket must be removed and washed separately
Why it's on GiftsFeed
Insulated can cooler that locks slim cans in place without threading
Most foam koozies soak through after a few minutes, and collapsible fabric sleeves do almost nothing to slow warming. This cooler uses the same vacuum-wall construction found in high-end water bottles, which actually stops heat from moving through the walls. The push-lock system matters because unscrewing a threaded gasket every time you want a fresh drink turns a simple swap into a chore, and over time those threads wear out or cross. A mechanism that lets you drop a can in and pull it out without rotating anything means you'll actually use it consistently, and the updated gasket threads make the one part you do need to unscrew—when cleaning—easier to handle without frustration.
Good gift when
- People who finish a cold drink slowly and hate lukewarm last sips
- Anyone tired of condensation rings on furniture or paperwork
- Fans of slim-can beverages who want reusable insulation
- Hosts who prefer gear that doesn't drip or require coasters
Skip it if You mostly drink from bottles, standard 12oz cans, or larger formats—this cooler is tailored specifically to the slim 12oz can profile and won't accommodate other shapes.
Specs
- Capacity
- 12oz slim cans
- Material
- Stainless steel with powder-coated finish
- Insulation
- Double-wall vacuum
- Base
- Non-slip rubberized
- Color
- Plum
- Locking Mechanism
- Push-Lock technology
- Gasket Thread
- OctaLock system
What's included
- One Hopsulator Slim cooler in plum finish
- Push-lock gasket with OctaLock thread system
If you're giving it
- No sizing to guess
Compact and universally useful, though the recipient should drink from slim cans regularly.
The details
This insulated cooler wraps a 12oz slim can in double-walled stainless steel, holding temperature from the moment you crack it open until the last swallow. Instead of screwing a gasket on and off each time you want a fresh drink, you push the can straight down into the cooler and the mechanism locks it in place. When you're done, lift it out without twisting anything loose.
The body uses vacuum insulation to prevent heat transfer, so condensation won't drip onto tables or soak through a coaster, and your hand won't warm the liquid inside. The gasket at the top seals around the rim of the can to keep cold air trapped inside the chamber. An updated thread system on the gasket makes it easy to unscrew for washing, then thread back on without fighting misaligned grooves.
A rubberized base grips smooth surfaces so the cooler stays put when you set it down. The plum finish is powder-coated over stainless steel, giving the exterior a matte texture that resists fingerprints and condensation smudges. The cooler fits standard 12oz slim cans—the tall, narrow format used by many seltzer, beer, and energy drink brands.
Because the insulation wraps the entire can, the cooler adds width and height compared to holding a bare can. It's designed for stationary use at a desk, on a patio table, or beside a grill, not for slipping into a pocket or a packed bag. The locking mechanism means you don't need to remove the can to drink, so once it's in place, it stays protected until you finish it or decide to swap it out.
Push-and-lock design holds 12oz slim cans secure while keeping drinks cold from first sip to finish
Ships and sold by BruMate. About this merchant
Questions
- Does this fit standard 12oz beer cans or just slim cans?
- This cooler is sized for 12oz slim cans only—the taller, narrower format used by many seltzers and light beers. It will not fit the wider, shorter profile of a standard 12oz can.
- How do you clean the gasket?
- The gasket unscrews using the OctaLock thread system, which is designed to make removal and reinstallation straightforward. Once removed, you can wash it separately and thread it back on without fighting misaligned grooves.
- Will this prevent condensation completely?
- The double-wall vacuum insulation prevents the outer surface from getting cold enough to form condensation, so it won't drip or leave rings on surfaces.
- Can you drink directly from the can while it's in the cooler?
- Yes. The push-lock design holds the can in place so you can drink without removing it. The gasket seals around the rim but leaves the opening accessible.
- Is this dishwasher safe?
- Vacuum-insulated stainless steel products are typically hand-wash only to preserve the insulation seal and finish, though the manufacturer's care instructions should be followed for specific guidance.
No reviews yet.
The first one comes from someone who bought it here.
More like this
20% off26-27 Weekly Grid Planner
Love Is Blind x maxbone Walk Set
Donguri Lamp
Sold outLittle Dutch Wooden Activity Hexagon Cube - Safari Friends
Sun Shower™ Coverall Dog Rain Suit
Fixed Adamas® | Black Paracord | Drop-point
Sold outUSA Ti Pocket Pro Cerakote *Limited Release*
