Do I need different hardware for concrete versus wood floors?

The kit includes both plastic anchors for concrete and screws that work in wood, so you have what you need for either surface. On concrete you drill pilot holes and tap the anchors in first, then drive screws into them. On wood subfloors you skip the anchors and drive screws directly into the joists.

Is the wax ring reusable if I need to remove the toilet later?

No. Wax rings compress and deform when the toilet is set, so they lose their sealing ability once disturbed. If you lift the toilet for any reason, you'll need a new wax ring to maintain a watertight seal when you reinstall it.

Will this kit work with toilets other than the Eau by TUSHY?

The kit is designed specifically for Eau by TUSHY installations. The flange diameter is 3.5 inches, which is a standard size, but you should verify that the mounting hole pattern and flange dimensions match your specific toilet or bidet system before using it with other fixtures.

What tools do I need to install this hardware?

You'll need a screwdriver or drill to drive the mounting screws. For concrete floors, add a hammer drill with a masonry bit to create pilot holes for the plastic anchors. A level helps ensure the flange sits flat before you tighten everything down.

Eau Toilet Flange Mounting Kit

The 3-second version

Four screws, anchors, and washers handle both wood and concrete floors
Wax ring creates a lasting watertight seal at the drain connection
3.5-inch flange matches standard residential drain pipe dimensions
Compatible with Eau by TUSHY only
Concrete installations require drilling pilot holes

Why it's on GiftsFeed

Complete hardware for securing a toilet flange to any floor surface

Most flange replacement jobs stall because you buy the flange but forget the wax ring, or you have screws but no anchors for your concrete slab. This bundles every fastener and seal in the correct quantity for one installation, so you open one package and have everything the job actually requires. The plastic anchors mean you're covered whether you're screwing into wood joists or tapping into a concrete floor, and the wax ring arrives sized to match the flange diameter. It's built for people who would rather spend twenty minutes installing a toilet than forty minutes driving back and forth to the hardware aisle.

Good gift when

Anyone replacing a toilet flange and needing all mounting hardware in one package
DIYers installing a bidet toilet who want to avoid multiple hardware store trips
People working with concrete subfloors who need anchors as well as screws

Skip it if Designed specifically for Eau by TUSHY installations and may not suit other toilet or bidet systems without verification of flange size and hole spacing

Specs

Flange Mounting Screws: 4
Plastic Anchors: 4
Washers: 4
Wax Ring: 1
Toilet Flange Diameter: 3.5 inches
Compatibility: Eau by TUSHY

What's included

4 Flange Mounting Screws
4 Plastic Anchors
4 Washers
1 Wax Ring
1 3.5-inch Toilet Flange

If you're giving it

No sizing to guess

Practical replacement hardware rather than a standalone gift item.

The details

This kit delivers every component required to attach a toilet flange firmly to the floor and establish a watertight seal at the drain opening. The package includes four mounting screws that pass through the flange holes and into the subfloor, four plastic anchors for use in concrete installations, four washers to distribute load, a wax ring that forms the seal between flange and drain pipe, and a 3.5-inch flange itself.

The mounting sequence follows standard plumbing practice: the flange sits over the drain opening, screws pass through the flange mounting holes into the floor below, and the wax ring compresses between the flange and the toilet base when the fixture is set. For concrete floors, you drill pilot holes first, tap the plastic anchors into place, then drive screws into those anchors. For wood subfloors, screws bite directly into the material.

The wax ring remains pliable enough to fill irregularities and maintain a seal even as the toilet shifts slightly over time. The flange diameter matches standard drain pipe sizing, and the mounting hole pattern aligns with conventional toilet base configurations. Everything arrives ready to use, with no additional fasteners or sealants to source separately.

Tushy

Eau Toilet Flange Mounting Kit

All the fasteners and sealing components needed to anchor a 3.5-inch flange and create a watertight connection to the drain

$24at hellotushy.com

Quantity

Buy from Tushy

Ships and sold by Tushy. About this merchant

The 3-second version

Four screws, anchors, and washers handle both wood and concrete floors
Wax ring creates a lasting watertight seal at the drain connection
3.5-inch flange matches standard residential drain pipe dimensions
Compatible with Eau by TUSHY only
Concrete installations require drilling pilot holes

Cheaper alternatives

Questions

Do I need different hardware for concrete versus wood floors?: The kit includes both plastic anchors for concrete and screws that work in wood, so you have what you need for either surface. On concrete you drill pilot holes and tap the anchors in first, then drive screws into them. On wood subfloors you skip the anchors and drive screws directly into the joists.
Is the wax ring reusable if I need to remove the toilet later?: No. Wax rings compress and deform when the toilet is set, so they lose their sealing ability once disturbed. If you lift the toilet for any reason, you'll need a new wax ring to maintain a watertight seal when you reinstall it.
Will this kit work with toilets other than the Eau by TUSHY?: The kit is designed specifically for Eau by TUSHY installations. The flange diameter is 3.5 inches, which is a standard size, but you should verify that the mounting hole pattern and flange dimensions match your specific toilet or bidet system before using it with other fixtures.
What tools do I need to install this hardware?: You'll need a screwdriver or drill to drive the mounting screws. For concrete floors, add a hammer drill with a masonry bit to create pilot holes for the plastic anchors. A level helps ensure the flange sits flat before you tighten everything down.